As summer brings intense heat and humidity, bubble film production equipment faces increased risks of overheating, corrosion, and electrical failures. Proper maintenance ensures optimal performance and extends machine lifespan. Here’s a targeted guide for global clients operating in diverse climates:
1. Optimize Cooling Systems**
- **Clean Ventilation Pathways**: Dust accumulation blocks airflow, raising internal temperatures. Use compressed air weekly to clean motor fans and heat exchanger fins.
- **Ambient Temperature Control**: Maintain workshop temperatures below 104°F (40°C). Install industrial exhaust fans or portable chillers in high-heat regions (e.g., Middle East, Southeast Asia).
---
2. Lubrication for Extreme Conditions**
- **High-Temperature Grease**: Switch to ISO VG68+ synthetic lubricants for gearboxes and bearings. In coastal/humid areas (e.g., South Asia), apply anti-corrosion coatings on exposed metal parts.
- **Shortened Intervals**: Reduce lubrication cycles by 30% in regions with sustained temperatures above 95°F (35°C).
---
3. Protect Electrical Components**
- **Moisture Prevention**: Use silica gel desiccant packs in control cabinets and seal cable entry points with waterproof grommets. Critical for monsoon-prone areas.
---
4. Adaptive Operational Strategies**
- **Load Scheduling**: Avoid peak heat hours (12 PM–3 PM). Implement 2-hour runtime intervals with 30-minute cooling breaks.
---
5. Key Component Checks**
- **Screw & Die Head**: Calibrate heating zones weekly; temperature deviations over ±9°F (±5°C) indicate faulty bands.
- **Air Compressors**: Drain moisture from tanks twice daily to prevent valve clogging.
---
6. Global Support Network**
- **24/7 Emergency Service**: Contact regional agents via WhatsApp/Teams for urgent support.
- **Preventive Maintenance Kits**: Order region-specific spare part bundles (e.g., “Tropical Climate Kit” with extra cooling fans and dehumidifiers).
---
Email: sales@ztechmc.com | Wechat: (0086)13790060625